View PD057VU7_7761460.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD057VU7 t he information contained herein is the e x clusi v e propert y o f prim e vi e w i n t er na tio na l co . , lt d. an d sha ll n ot b e distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten pe r mission of prime vie w international co., ltd. page:1 b y c on f i r m ed b y p r e p a r ed b y p-511-508(v:4) f o r m o r e i n f o r m a t i o n : a z d i s p l a y s , i n c . 7 5 c o l u m b i a , a l i s o v i e j o , c a 9 2 6 5 6 h t t p : / / w w w . a z d i s p l a y s . c o m
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:2 revision history rev. issued date e ng. revised contents 1.0 may 15, 2008 &?d new 2.0 may 19, 2009 &?d delete backlight connector pin pitch before ? connector type ? jst bhr-03vs-1, pin no 2 pins, pitch=3.5mm after ? connector type ? jst bhr-03vs-1, pin no 3 pins 3.0 jun. 19, 2009 &?d icc max. from 100ma to 75ma 4.0 jul. 3, 2009 &?d lcd panel power consumptio o max. from 0.33w to 0.25w total power consumption max. from 2.97w to 2.89w p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:3 t e chnical sp e ci f icati o n contents no. item pa g e - cover 1 - contents 2 - revision history 3 1 application 4 2 f eatures 4 3 mechanical specifications 4 4 mechanical drawing of t f t-lcd module 5 5 input / o utput terminals 6 6 touch panel characteristics 7 7 absolute maximum ratings 9 8 e lectrical characteristics 9 9 pixel arrangement 10 10 display color and g ray scale reference 11 11 interface timing 12 12 power o n sequence 15 13 o ptical characteristics 15 14 handling cautions 18 15 reliability test 19 16 packing diagram 20 p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:4 1 . a pplication this data sheet applies to a color t f t lcd module, PD057VU7. PD057VU7 module applies to o a product, car tv (must use anal og to digital driving board), which requires high quality flat panel display. if you must use in severe reliability environment, please dont extend over pvis reliability test conditions. 2 . f eatures . qv g a (320*240 pixels) resolution . module with resistive type touch panel . amorphous silicon t f t lcd panel with l e d . pixel in stripe configuration . thin and light weight . display colors ? 262,144 colors . ttl interface 3 . m echanical s pecifications p arameter s pecifications unit screen size 5.7 (diagonal) inch display f ormat 320 j (r, g ,b) j 240 dot display colors 262,144 active area 115.20 (h) j 86.4 (v) mm pixel pitch 0.36(h) j 0.36(v) mm pixel configuration stripe o utline dimension 144(w) ? 104.6 (h) ? 14.45 (d) (typ.) mm weight 244 2 10 g back-light 36-l e d surface treatment anti-glare + swv display mode normally white surface treatment of touch panel 3h g ray scale inversion direction 6 o`clock [ ref. to note 13-1 ] p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:5 4 .m echanical drawing of t f t -l c d m odule o utline drawing : f ront view (unit : mm) e 307459 p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:6 5 .i nput / o utput t erminals 5-1) t f t -l c d p anel driving connector type: e lc o 08-6210-033-340-800a+, pin no 33 pins p in n o s ymbol i / o description remark 1 g nd - g nd 2 ck i clock signal for sampling each data signal 3 hsync i horizontal synchronous signal(neqative) 4 vsync i vertical synchronous signal(neqative) 5 g nd - g nd 6 r0 r e d data signal(lsb) 7 r1 i r e d data signal 8 r2 i r e d data signal 9 r3 i r e d data signal 10 r4 i r e d data signal 11 r5 i r e d data signal(msb) 12 g nd - g nd 13 g 0 i g r ee n data signal(lsb) 14 g 1 i g r ee n data signal 15 g 2 i g r ee n data signal 16 g 3 i g r ee n data signal 17 g 4 i g r ee n data signal 18 g 5 i g r ee n data signal(msb) 19 g nd - g nd 20 b0 i blue data signal(lsb) 21 b1 i blue data signal 22 b2 i blue data signal 23 b3 i blue data signal 24 b4 i blue data signal 25 b5 i blue data signal(msb) 26 g nd - g nd 27 e nab i signal to settle the horizontal display position(positive) note5-1 28 v cc - +3.3v power supply 29 v cc - +3.3v power supply 30 r/l i horizontal display mode select signal l ? normal ,h ? left /right reverse mode note5-2 31 u/d i vertical display mode select signal h ? normal ,l :up/down reverse mode note5-3 32 v/q i v g a / qv g a mode select signal note11-2 33 g nd - g nd note5-1 ? the horizontal display star t timing is settl ed in accordance with rising of e nab signal. in case e nab is fixed low,the horizontal star t timing is determined as described in 10-2. don`t keep e nabhigh during operation. p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:7 note 5-2 , 5-3 the definitions of u/d & r/l r/l(pin 30)= low, u/d(pin 31)= high r/l(pin 30)= high , u/d(pin 31)= low 5-2) l e d backlight driving connector type: jst bhr-03vs-1, pin no 3 pins p in n o s ymbol description remark 1 + input terminal (anode) red 2 nc no connect - 3 - input terminal (cathode) black 6 .t ouch p anel c haracteristics 6-1) p in assignment ? ? ? ? pi n no . desi g na tio n rem a rk 1 yu (b ottom ) 2 xl (t o p) 3 yl (b otto n) 4 x r (t o p) p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:8 6-2) e lectrical p erformance ? ? ? ? p a r a meters s y mbo l m in . typ. m a x. un it rem a rk x 400 550 810 ? t ermi nal resist anc e y 230 320 540 ? i npu t v o l t a ge v t - 5 7 v l i n e a rit y (x ,y d ire c tio n) - - 1.5 % i n s ula tio n im p e danc e 20 - - m? d c 25v res p o n se t ime - - 15 ms op er a tio n f or c e - - 50 g note 6-1 note 6-1 input through r0.8mm stylus or r8.0mm finger. 6-3) durability p erformance 1. hitting durability: at least 1,000,000 times with r8.0mm silicon rubber, 250g, 3 times/sec. 2. sliding durability: at least 1,00,000 times with r0.8mm polyacetal stylus, 250g, 60 mm/sec. 6-4) i ntegration design g uide avoid the design that f ront-case overlap and press on the active area of the touch-panel. g ive enough gap (over 0.5mm at compressed) between the front case and touch-panel to protect wrong operating. use a buffer material ( g asket) between the touch-panel and front-case to protect damage and wrong operating. avoid the design that buffer material overlap and press on the inside of touch-panel viewing area. p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:9 note 6-2 we strongly suggest to follow above design guide to avoid the linear defect happened on the touch panel. 7 .a bsolute m aximum ratings: g nd=0v, ta=25 : p arameters s ymbol c ondition ma x . unit remark input voltage v i ta=25 : -0.3~+4 v note7-1 +3.3v supply voltage v cc ta= 25 : 0~+3.6 v note7-1:ck,r0~r5, g 0~ g 5,b0~b5,hsync,vsync, e nab,r/l,u/d,v/q 8 . e lectrical c haracteristics 8-1) recommended o perating c onditions: g nd=0v, ta=25 : i tem s ymbol m in . t yp . m ax . unit remark +3.3v supply voltage v cc +3.0 +3.3 +3.6 v permissive input ripple voltage v r f - - 100 mvp-p v cc =3.3v input voltage(low) v il 0 - 0.3 v cc v input voltage(high) v ih 0.7 v cc - v cc v p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:10 8-2) recommended driving c ondition for l e d back light ta=25 : p a r a meter s y mbo l m i n. typ. ma x . un it rem a rk le d v o l t a ge v le d - - (11) v note 8-1 le d cu rre n t i le d - 20 - ma note 8-2 bac k l ig h t po w er c o n s u m p tio n p le d - - 2640 m w note 8-1 note 8-3 note 8-1 ? the i l e d = 20 ma (constant current) note 8-2 ? the l e d driving condition is defined for each l e d module. (3 l e d serial) the input current= 20 ma*12=240 ma. note 8-3 ? p l e d = v l e d-1 * i l e d-1 + v l e d-2 * i l e d-2 .. + v l e d-11 * i l e d-11 +v l e d-12 * i l e d-12 8-3) p ower c onsumption p arameters s ymbol t yp . m ax . unit remark +3.3v current dissipation i cc 67 75 ma lcd panel power consumption - 0.22 0.25 w note 8-4 total power consumption - - 2.89 w note 8-4 ? the power consumption for back light is not included. 9 . p ixel a rrangement the lcd module pixel arrangement is stripe configuration. a n o d e ca t h o d e p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:11 10 . display c olor and g ray s cale reference i nput c olor data color red g reen blue r5 r4 r3 r2 r1 r0 g 5 g 4 g 3 g 2 g 1 g 0 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 g reen (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 basic blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 colors cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 darker red ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 g reen (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 g reen (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 g reen (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darker g reen ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter g reen (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 g reen (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 g reen (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 darker blue ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:12 11 . i nterface t iming 11-1) t iming p arameters ac e lectrical characteristics (v cc =+3.3v, g nd=0v,ta=25 : ) characteristics symbol min. typ. max. unit remark - 25.18 28.33 mhz v/q=h f requency 1/tc - 6.3 7.0 mhz v/q=l clock duty ratio tch/tc 40 50 60 % v/q=l set up time tds 5 - - data hold time tdh 10 - - ns 30.0 31.8 - us th 700 800 900 clock v/q=h 50.0 63.6 - us cycle th 360 400 450 clock v/q=l horizontal sync. signal pulse width thp 2 96 200 clock tv 515 525 560 v/q=h cycle tv 251 262 280 line v/q=l vertical sync. signal pulse width tvp 2 - 34 line horizontal display period thd 320 clock hsync.-clock phase difference thc 10 - tc-10 ns hsync.-vsync. phase difference tvh 0 - th-thp ns 34 v/q=h vertical sync. signal start position tvs 7 line v/q=l note11-1 ? in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. parameter symbol min. typ max unit remark set up time tes 5 - tc-10 ns e nable signal pulse width tep 2 320 th-10 clock 44 - th-664 v/q=h hsync- e nable signal phase difference the 2 - th-340 clock v/q=l note11-2 ? when e nab is fixed at v/q=low, the display starts from the data of c52 (clock). when e nab is fixed at v/q=high, the display starts from the data of c104 (clock). p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:13 11-2) t iming diagram d2 c1 thp horizontal sync. s ignal ( hs y nc ) clock signal (ck) data signal (r0~r5, g 0~ g 5, b0~b5 ) data e nable signal ( e nab ) 0.7vdd 0.7vdd 0.3vdd thc 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.7vdd cn *1 td s tdh horizontal invalid data period d1 d320 number of h-data 0.3vdd 0.7vdd thd t e p th e t es tcl tch tc 0.7vdd 0.7vdd horizontal invalid data period th 0.3vdd *1 wh e n e na b is f ixe d a t v/q=h, t h e d is play st a rts f rom t h e da t a o f c104 (cl o c k ). wh e n e na b is f ixe d a t v/q=l, t h e d is play st a rts f rom t h e da t a o f c52 (cl o c k ). p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:14 tv 0.3v dd v erti cal s ync. sig nal(v s ync) d a t a sig nal( r 0~ r 5,g0~g5, b0~b5) v erti cla i nval i d da t a p erio d 0.7v dd tvp 0. 3v dd tvh 0.7 v dd h ori z o n t al s ync. sig nal(h s ync) 1l i n e 2l i n e n l i n e d h1 d h2 d h240 v erti cla i nval i d da t a p erio d tv s tvd *2 th e v erti cal d is play p ositio n (tv s ) is f ixe d a t 34 t h l i n e (v/q=h) and 7 t h l i n e (v/q=l). *2 p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:15 12 . p ower o n s equence v dd 3.0v 0.3v 3.0v t 1 t 2 t 3 sig nal*3 1. 0 t1 20ms 2. 0 t2 50ms 3. 0 t3 1s 13 . o ptical c haracteristics 13-1) s pecification: ta=25 : p arameter s ymbol c ondition min. t y p. ma x . unit remarks horizontal e 55 60 - deg note 13-1 e (to 6 oclock) 45 50 - deg viewing angle vertical e (to 12 oclock) cr
10 35 40 - deg contrast ratio cr at optimized viewing angle 300 600 - - note 13-2 rise tr - 15 30 ms response time f all tf e =0 c - 25 50 ms note 13-3 brightness - e =0 / y =0 500 600 - cd/ d note 13-5 luminance uniformity u% 80 85 - % note 13-6 x 0.27 0.31 0.35 - white chromaticity y 0.30 0.34 0.38 - l e d life time - 20000 - - hrs note 13-4 10 ms 10 ms bac k l ig h t o n off off p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:16 note 13-1 ? the definitions of viewing angles are as follow note 13-2 ? the definition of contrast ratio p a tter n blac k a t lu mi nanc e p a tter n a t wh ite lu mi nanc e c r = note 13-3 ? definition of response time t r and t f 100% 90% 10% 0% white white brightness black tr tf note 13-4 ? the l e d life time is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25 : and i l e d = 240ma. le d p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:17 note 13-5 ? all optical measurements shall be perform ed after backlight being turned-on for 30 mins. the optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 lux). the measuring configuration shows as following figure. note 13-6 ? the uniformity of lcd is defined as the minimum brightness of the 9 testing points u = the maximum brightness of the 9 testing points luminance meter: bm-5a or bm-7 fast (t o pc o n) measurement distance: 500 mm +/- 50 mm ambient illumination: < 1 lux measuring direction: perpendicu lar to the surface of module the test pattern is white. 1/6 1/6 2/6 2/6 1/6 1/6 2/6 2/6 p h otometer (to p co n bm-5 a or bm-7 fa st ) 500 mm +/- 50 mm tft-lc d mo dul e op ti cal cha r ac teristi c s me a s u ri n g c o nf ig u r a tio n f ie ld = 1 p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:18 14 . handling c autions 14-1) m ounting of module a) please power off the module when you connect the input/output connector. b) polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) protective film (laminator) is applied on surf ace to protect it against scratches and dirts. d) please following the tear off direction as fi gure 14-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 14-2) p recautions in mounting a) when metal part of the t f t-lcd module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) wipe off water drops or finger grease i mmediately. long contact with water may cause discoloration or spots. c) t f t-lcd module uses glass which breaks or cracks easily if dropped or bumped on hard surface. please handle with care. d) since cm o s lsi is used in the module. so take care of static electricity and earth yourself when handling. 14-3) a d j usting module a) ad j usting volumes on the rear face of the module have been set optimally before shipment. b) therefore, do not change any ad j usted values. if ad j usted values are changed, the specifications described may not be satisfied. 14-4) o thers a) don`t expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) store the module at a room temperature place. c) the voltage of beginning electric disc harge may over the nor mal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) if lcd panel breaks, it is possibly that the liquid crystal escapes from the panel. avoid putting it into eyes or mouth. when liquid crystal sticks on hands, clothes or feet. wash it out immediately with soap. e) o bserve all other precaut ionary requirements in handling general electronic components. f) please ad j ust the voltage of common electrode as material of attachment by 1 module. 14-5) p olarizer mark the polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction. f igure 14-1 the way to peel off protective film p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:19 15 . reliability t est n o t est i tem t est c ondition remark 1 high temperature storage test ta = +85 : , 240 hrs 2 low temperature storage test ta = -40 : , 240 hrs 3 high temperature o peration test ta = +80 : , 240 hrs 4 low temperature o peration test ta = -30 : , 240 hrs 5 high temperature & high humidity o peration test ta = +60 : , 90%rh, 240 hrs (no condensation) 6 thermal cycling test (non-operating) -20 : +70 : , 200 cycles 30 min 30 min 7 vibration test (non-operating) f re qu e ncy: 10 ~ 57 hz /v ibr a tio n w i d t h:0.075 mm 58-500 hz / g r av it y: 9.8 m / s 2 s w ee p time : 11 mi nu tes t est p erio d: 3 h rs f or e ach d ire c tio n o f x, y, z 8 shock test (non-operating) g r av it y: 490 m / s 2 * 6 ms dire c tio n: d x, d y, d z 3 times for each direction 9 e lectrostatic discharge test (non-operating) mach i n e m o d e = d 200v c = 200pf , r = 0 1 times d is cha rge f or e ach pad 10 hitting durability test (touch panel) 1,000,000 times, with r 8.0 mm silicon rubber, 250g, 3times/sec 11 sliding durability test (touch panel) 1,00,000 times, with r 0.8 mm polyacetal stylus, 250g, 60mm/sec ta: ambient temperature note: the protective film must be removed before temperature test [criteria] in the standard conditions, there is not display function n g issue occurred. (including ? line defect, no image) all the cosmetic specification is j udged before the reliability stress. p-511-508(v:4)
PD057VU7 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be distributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:20 16 . p acking diagram p-511-508(v:4)

▲Up To Search▲

Price & Availability of PD057VU7

	To Download PD057VU7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .